B16.54"-manufacture,factory,supplier from China

Type 201 Stainless Steel is an austenitic chromium-nickel-manganese stainless steel which was developed to conserve nickel. Type 201 is a lower cost alternative to conventional Cr-Ni stainless steels such as 301 and 304. Nickel is replaced by additions of manganese and nitrogen. It is non-hardenable by thermal treatment, but may be cold worked to high tensile strengths. Type 201 is essentially nonmagnetic in the annealed condition and becomes magnetic when cold worked.

Stainless steel grade 301 is a commonly available austenitic stainless with good corrosion resistance and elevated carbon to allow for cold working to a variety of tempers.

ASTM A312 pipe is the general use stainless steel pipe applied in different industries. It covers diameters from 1/8” to 30” and thickness from SCH 10S to SCH 80S.

All stainless steel pipes shall be manufactured in length of 6m and may be cut to a required length accordingly to the user's requirement.Product Parameters：ItemStainless Steel Tube/PipeSteel grade200series,300 series,400series,duplexStandardASTM A213,A312,ASTM A269,ASTM A778,ASTM A789,DIN 17456,DIN17457,DIN 17459,JIS G3459,JIS G3463,GOST9941,EN10216,BS3605,GB13296Material304,304L,309S,310S,316,316Ti,317,317L,321,347,347H,304N,316L, 316N,201,202SurfacePolishing,annealing,pickling,brightTypehot rolled and cold rolledstainless steel round pipe/tubeSizeWall thickness1mm-150mm(SCH10-

Grade 410 stainless steel is a basic, general purpose, martensitic stainless steel. It is used for highly stressed parts, and provides good corrosion resistance, high strength and hardness. Grade 410 stainless steel pipes contain a minimum of 11.5% chromium.

Monel 400 PipeMonel 400 Pipe belongs to the copper-nickel corrosion-resistant alloy, which is the corrosion-resistant alloy with the greatest consumption, the most versatile and extremely good complete performance. Monel 400 Pipe has fantastic corrosion resistance in hydrofluoric acid and fluorine fuel medium, and additionally has exquisite corrosion resistance to warm focused lye. At the equal time, Monel 400 Pipe is resistant to corrosion from impartial solutions, water, sea water, air, natural compounds, etc.

The chemical composition of Monel400 alloy is mainly composed of 30%Cu and 65%Ni plus a small amount of Fe(1%-2%). The structure is typical monophasic austenite.

Alloy X-750 exhibits excellent oxidation resistance to combustion gases at ambient temperatures up to 1600°F(870°C).Product Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)Forged Bar: 180~400mmLengthCustomizedApplicationAuto, turbines, blades, powder and engines，etcFeatureHi

Stainless steel plate is detection and shaping have to be off-line processing.

Stainless steel plate is detection and shaping have to be off-line processing.

Products DescriptionStainless steel plate of its restrained ordinary performance of the choice, the general low precision seamless metal pipe : wall thickness is not uniform, stainless-steel plate's floor brightness is low, stainless-steel plate's cost of immoderate-length, and the arrival of pitting, black spots are not clean to get rid of. Product Namel stainless steel plateThickness0.1~150mmWidth600mm,1000mm,1219mm,1500mm,1800mm,2000mm,2500mm, 3000mm, 3500mm,etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcStandardASTM GB/T JIS4 ASME BS DIN ENMaterial200 series: 201/202300 s

310 stainless-steel hex bar may be categorically said that metal bars are one of the middle components of any manufacturing industry or for that matter any industry that is based on machineries.

The "303" refers to the grade of stainless-steel, which contains chromium and nickel for improved corrosion resistance. it also contains small amounts of sulfur, which improves machinability. 303 chrome steel is frequently used for machining and has good normal mechanical homes.The "h-beam" refers back to the form of the metal, that's inside the shape of an "h" whilst considered from the stop.

Stainless steel angle is a carbon structural steel for construction, is a simple section of the section steel, mainly used for metal components and plant framework, etc..

ASTM A312 Seamless Stainless Steel PipeStainless metal cloth is used to produce quite a number products. Pipes being one of them. They are divided into subcategories. ASTM A312 Seamless Stainless Steel Pipe is one such grade that is closely bloodless labored welded stainless metal pipe. ASTM A312 Seamless Stainless Steel Pipe is designed to be used in excessive temperature and excessive offerings the place conventional corrosion is generally seen. They are manufactured both in welded, seamless, or coldworked form.

The machinability of grade 202 stainless steel produces long, gummy chips. Machining can also be performed in the annealed condition. For heat treatment, the material has to be soaked at 1038°C (1900°F) for 30 min and cooled below 16°C (60°F) for full martensite transformation. The material can be welded by common fusion and resistance methods; however, this steel should not be joined using oxyacetylene welding method. The recommended filler metal is AWS E/ER630. Forging can be done by pre-soaking for 1 h at 1177°C (2150°F).

Angle steel is a carbon structural steel for construction, is a simple section of the section steel, mainly used for metal components and plant framework, etc.. In use requires good weldability, plastic deformation properties and a certain mechanical strength.

Inconel 601 Seamless PipeThe performance characteristics of Inconel601 are better than 600. It is an alloy with high chromium content. It has excellent oxidation and corrosion resistance. Because the composition also contains aluminum, it has good oxidation resistance and curing performance.

Inconel 617 is known for its use in extreme environments, exhibiting high-temperature strength and oxidation resistance even at temperatures in excess of 1800 degrees Fahrenheit (980 degrees Celsius) as well as excellent corrosion resistance to a variety of corrosive environments. It is the unique properties of the Inconel617 that make it ideal for a wide range of components in the power generation, nuclear, petrochemical, food processing, aerospace, heat treatment and chemical industries.

The Incoloy 901 Nickel Base Alloy Pipe content makes it have better oxidation resistance than standard 18-8 stainless steel, and its oxidation resistance is no less than that of higher grade alloys with temperatures up to 1900 ° f (1038 ° c).1. Fire control system, seawater purification system, hydraulic pressure and perfusion piping system in ocean engineering.2, cellulose pulp production in the bleaching pool.3. Polished rods in corrosive oil Wells.4. Hose system in ocean engineering.5. Pipelines, joints and airflow systems in acid gas production.6.

Section shrinkage ψ(%):134 degrees, aging ≥ 61Density melting point for Young's modulus and Poisson's ratio, yield strength, tensile strength, elongationProduct Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)Forged Bar: 180~400mmLengthCustomizedApplicationAuto, turb

C-276 alloy welding performance and common austenitic stainless steel is similar to using a welding method for welding C-276 before, we must take measures to make the corrosion resistance of the weld and heat affected zone the smallest decline, such as tungsten gas shielded arc welding (GTAW), gas metal arc welding (GMAW), submerged arc welding or some other can make the weld and heat affected zone the smallest decline in corrosion resistance welding method.

Hastelloy G-35 Nickel Base Alloy PipeHastelloy G-35 is an upgraded product of G-30, it has extremely good corrosion resistance in moist manner phosphoric acid manufacturing surroundings extensively used in fertilizer manufacturing, the place it performs a long way higher than G-30 and stainless metal . It is additionally resistant to localized corrosion and chloride stress corrosion cracking in chloride-containing media. The excessive chromium content material makes it very resistant to corrosion through different oxidizing acids such as nitric acid and nitric acid-containing mixtures.

Application example: The exhaust valve of diesel engine for ship and tank is mainly made by Nimonic 80A forging. Nimonic 80A has high heat resistance, high strength at high temperature, large deformation resistance, increasing the difficulty of forging forming.