Cold drawn or annealed-manufacture,factory,supplier from China

Cold Drawn Stainless Steel Welded PipeIt is mostly used to manufacture parts that are resistant to atmospheric, water vapor, water and oxidative acid corrosion.Cold Drawn Stainless Steel Welded Pipe  videoProduct Parameter：DescriptionItemStainless Steel Pipe / TubeSteel grade200 series 300 series 400 series 600 series 900 seriesStandardASTM A213,A312,ASTM A269,ASTM A778,ASTM A789,DIN 17456, DIN17457,DIN 17459,JIS G3459,JIS G3463,GOST9941,EN10216, BS3605,GB13296Material201 202 203 204 301 302 303 303se 304 304L 304N1 304N2 304LN 305 309 309S 310 310S 316 316L 316N 316J1 316J

Type 301 is an austenitic chromium-nickel stainless steel that is available in the annealed and cold worked conditions. In the annealed condition, Type 301 offers the highest level of stretch formability of any stainless steel and in the heavily cold worked condition offers the highest strength level of any 300 series stainless steel. Type 301 is non-magnetic in the annealed condition but becomes magnetic as a result of cold working.Type 301 is corrosion resistant in many environments, but the corrosion properties are less than that of 304/304L stainless steel.

Chemical compositionCarbon (C) : 0.15 or lessSilicon (Si) : 1.00 or lessManganese (Mn) : 5.5 ~ 7.50Chromium (Cr) : 16.0 ~ 18.0Nitrogen (N) : 0.25 or lessPhosphorus (P) : 0.060 or lessSulfur (S) : 0.030 or lessNickel (Ni) : 3.5 to 5.5See the ASTM A666TechniqueForged/Hot Rolled/Cold Drawn/PeeledCategory1.Round bar1)Hot rolled black bar: (5-400)x6000mm or according to your requirement.2)Acid round bar: (5-400)x6000mm or according to your requirement.3)Cold drawn bright bar: (1-20)x6000mm or according to your requirement.4)Polishing round bar: (5-400)x6000mm or according to your requests.2.

Stainless-steel coil/strip;stainless steel 430 ba coil; stainless steel cold rolled strip;stainless-steel cold rolled coil;stainless steel coil 201/304/430 merchandise description product name:cold rolled stainless-steel coils, cease 2b/ba, mild deep drawing great 1) grade: 201, 304, 410, 430 etc.

Type 301 is a chromium nickel austenitic stainless steel capable of attaining high strengths and ductility by cold working. It is not hardenable by heat ...Type 301 is corrosion resistant in many environments, but the corrosion properties are less than that of 304/304L stainless steel.

Stainless steel sheet is available in kind 304 and sort 316. type 304 may be easily roll-formed or bent, and its incredible corrosion resistance and weldability make it one of the maximum popular grades. Type 316 is a excessive corrosion resistance alloy, providing extra resistance to pitting-kind corrosion.

Specification of stainless steel rod: From 1.0mm to 250mm size (diameter, side length, thickness or opposite side distance) not more than 250mm hot rolled and forged stainless steel rod.Stainless steel rod material :304, 304L, 321, 316, 316L, 310S, 630, 1Cr13, 2Cr13, 3Cr13, 1Cr17Ni2, duplex steel, antibacterial steel and other materials!TechniqueForged/Hot Rolled/Cold Drawn/PeeledCategory1.Round bar1)Hot rolled black bar: (5-400)x6000mm or according to your requirement.2)Acid round bar: (5-400)x6000mm or according to your requirement.3)Cold drawn bright bar: (1-20)x6000mm or according to your

Our Stainless Steel 309 Angles/ Channels also has various advantages such as it has the heating elements, carbon saggers, waste incinerators, heat exchangers and much more.Product Parameter：Product NameStainless Steel ChannelSize50*37*4.5 - 400*104*14.5SurfaceBA, 2B, 2D, 4K, 6K, 8K, NO.4, HL, SB, EmbossedThinckness4.5mm-14.5mmWidthness50mm~2000mm or customizedLength1000mm~6000mm or customizedPackingIndustry standard packaging or according to client's requirementTechniqueCold Drawn/Cold pilfered/Cold rolled/Hot rolled/forge-Can be processed again repeatedlyStantardAISI, ASTM, BS, DIN, GB, J

317L hexagonal bar can be cold-drawn. For some demanding applications, 4% or more molybdenum in the welding coating of type 317 alloy hex bar is desirable.

0.3 mm 0.8mm 1.25mm 2mm Galvanized Steel WireGood reliabilityIt: can improve some knots, burrs and rust on the steel wireGood Elasticity：Galvanized steel wore toughhness is very good,elasticity is very good,very suitable for making springSpecificationProduct NameGalvanized WireTypeDrawn Wire/Spring/GalvanizedApplicationBuildings, traffic barriers, handicrafts, etcAlloy Or NotIs AlloyTolerance±1%Processing ServicePickling, Hot dipping, Drawing, Cold-drawingGradeLow-carbon steelDelivery Time15-21 daysLengthCustomized LengthDiameter0.1-3.15mm CustomizableTechniqueCold Drawn Hot RolledTensile

440 stainless steel channel steel is mainly used for building structure, vehicle manufacturing and other industrial structure, often used with beams.Product Parameter：Product NameStainless Steel ChannelSize50*37*4.5 - 400*104*14.5SurfaceBA, 2B, 2D, 4K, 6K, 8K, NO.4, HL, SB, EmbossedThinckness4.5mm-14.5mmWidthness50mm~2000mm or customizedLength1000mm~6000mm or customizedPackingIndustry standard packaging or according to client's requirementTechniqueCold Drawn/Cold pilfered/Cold rolled/Hot rolled/forge-Can be processed again repeatedlyStantardAISI, ASTM, BS, DIN, GB, JISMaterialsWe can offer

420 8K Surface Cold Rolled Stainless Steel Plate/Sheet FREE samples are available for your checking and testing.

Products Description1, Not scared of moist, no longer terrified of water, can be soaked in water, completely deformed, do now not rust. 2, With a chain power, no deviation, no deformation. 3, The chain board may be based totally on patron requirements of numerous diameter of the round hollow, with the intention to meet the needs of the client's manufacturing.Product Namel stainless steel plateThickness0.1~150mmWidth600mm,1000mm,1219mm,1500mm,1800mm,2000mm,2500mm, 3000mm, 3500mm,etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcStandardASTM GB/T JIS4 ASME BS DIN ENMaterial200 se

PRODUCT DESCRIPTION316 Cold Rolled Stainless Steel Plate/Sheet3mm thick stainless steel sheet with good qualityCold rolled ISO9001 certificate 316 stainless steel sheet StandardAISI ASTM GBPlace of OriginChinaModel Number200 Series:201 202300 Series:301 302 303 304 304L 309 309S 310 316 316L 321 904L400 Series:410 420 430 440Duplex stainless:2205 2507TypeFlat/corrugated/checkeredProcessing ServiceBending,Welding,Decoiling,Punching,Cutting, MouldingSurface Finish2B/No.1/Mirror Finish/Satin PolishedDelivery Time3-10 daysPayment terms30%TT Advance+70% Balance against the copy of bill of load

Type 201 Stainless Steel is an austenitic chromium-nickel-manganese stainless steel which was developed to conserve nickel. Type 201 is a lower cost alternative to conventional Cr-Ni stainless steels such as 301 and 304. Nickel is replaced by additions of manganese and nitrogen. It is non-hardenable by thermal treatment, but may be cold worked to high tensile strengths. Type 201 is essentially nonmagnetic in the annealed condition and becomes magnetic when cold worked.

254SMO is an austenitic stainless steel.  Because of its high molybdenum content, it has very high resistance to spot corrosion and crevice corrosion. Main ingredients:254 smo carbon (C) 0.02 or less, manganese (Mn) of 1.00 or less, nickel (Ni) 17.5 ~ 18.5, silicon (Si) of 0.8 or less phosphorus (P) of 0.03 or less, sulfur (S) of 0.01 or less, chromium (Cr) 19.5 ~ 20.5, copper (Cu) 0.5 ~ 1.0, molybdenum (Mo) 6.0 ~ 6.5  National standards: UNS S31254, DIN/EN 1.4547, ASTM A280, ASME SA-240  Welding material: ERNiCrMo-3 wire, ENiCrMo-3 electrode Product Name254smo st

309S stainless steel flat steel characteristics: can withstand 980 repeated heating, with high temperature strength and oxidation resistance, carburizing resistanceProduct Parameter：ITEMStainless Steel Flats bar SizeWidth 3-500mm;Thickness0.3-120mm;Length:1000-600mm(or as your request)SurfaceBlack, pickled, bright, ground as per customers' requirementFinish Hot rolled, cold drawn, hot forgedMaterial201.202.301.302.304.304L.310S.316.316L.321.430.430A.309S.2205.2507.2520.430.410.440.904Lect.

Stainless steel pipe and fittings are supplied in the annealed condition to facilitate fabrication and ensure best corrosion resistance.

430 stainless steel is used for building decoration, fuel burner parts, household appliances, household appliance parts. 430F is 430 steel with easy cutting properties, mainly used in automatic lathes, bolts and nuts.Product Parameter：ITEMStainless Steel Flats bar SizeWidth 3-500mm;Thickness0.3-120mm;Length:1000-600mm(or as your request)SurfaceBlack, pickled, bright, ground as per customers' requirementFinish Hot rolled, cold drawn, hot forgedMaterial201.202.301.302.304.304L.310S.316.316L.321.430.430A.309S.2205.2507.2520.430.410.440.904Lect.

304 304L Stainless Steel304 is a variation of the basic 18-8 grade, Type 302, with a higher chromium and lower carbon content. Lower carbon minimizes chromium carbide precipitation due to welding and its susceptibility to intergranular corrosion. In many instances, it can be used in the ”as-welded“ condition, while Type 302 must be annealed in order to retain adequate corrosion resistance. Type 304L is an extra low-carbon variation of Type 304 with a 0.03% maximum carbon content that eliminates carbide precipitation due to welding.

ProductStainless Steel Sheet/Plate/CoilSurface FinishBA, 2B, 2D, 4K, 6K, 8K, NO.4, HL, EmbossedTechniqueHot Rolled / Cold RolledStandardGB JIS ASTM ASME ENSteel Grade200 series: 201 202300 series: 301 304 304L 309 310 310s 316 316L 321400 series: 409 410 410S 420 430ColorStandard RAL color:red,bule,white,grey,brick,etc.Stock Dimension0.5mm-4mm x 1220mm/1500mm x 2440mm/2500mm;5mm-25mm x 1220mm/1500mm x 2440mm/2500mm/6000mm;8mm-80mm x 1500/1800/2000mm/2500 x 6000mm;cut to size according to customers' demandsServiceOEM, customized processing service, customized fabrication by drawingsProcessi

Stainless Steel 317 Square Bars & Rods have excellent yield strength and tensile strength, which is suitable for cold working and annealed condition appliance. It has nickel and low carbon content to provide high formability and excellent corrosion resistance to alkaline compounds. SS 317 Bars & Rods is austenitic stainless steel non-magnetic in nature, less conductivity to electricity, and less brittle at low temperature.

The 430 bright annealed custom C-Channel (BA) finish is cold rolled stainless steel that is annealed in a controlled atmosphere to retain a highly reflective finish. Although it is not completely identical to the #8 mirror finish, it appears to be very similar.

430 stainless steel has the following states, the state is not the same, dirty and corrosion resistance is not the same.NO.1, 1D, 2D, 2B, N0.4, HL, BA, Mirror, and various other surface treatment states.1D- The surface is discontinuous and granular, also known as fog surface. Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.2D- slightly shiny silvery white. Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.2B- Silvery white with better gloss and flatness than 2D surfaces.