​Flange-manufacture,factory,supplier from China

Implementation principleThreaded flange is a kind of non-welded flange, which processes the inner hole of the flange into pipe threads, and is matched with the threaded pipe to realize the connection. Compared with the flat welding flange or the butt welding flange, the threaded flange has the characteristics of convenient installation and maintenance, and can be used on some pipelines where welding is not allowed. Alloy steel flanges have sufficient strength, but are not easy to weld, or the welding performance is not good, and threaded flanges can also be selected.

Types of Socket Weld FlangesSocket Weld Raised Face FlangeRaised Faced Socket weld Flanges4 Bolt Socket Weld flange300# Socket Weld FlangeANSI B16.5 Socket weld FlangesSocket weld Flange DimensionsASME B16.5 SWRF FlangesANSI B16.5 Class 150 Socket weld FlangesStainless Steel Socket weld Flanges Suppliers1 inch Socket weld FlangeSocket weld Ring Type Joint FlangesASME B16.47 Series A and B SWRF Flanges2 inch Socket weld Flange3 inch Socket weld FlangeANSI B16.5 class 150 SWRF Flange StockholderANSI 150 Socket weld Flange4 inch Socket weld FlangeHigh Quality SWRF FlangesFlat Face SWRF Flange6 in

Loose flange: This kind of flange is often used in the case where the medium temperature and pressure are not high and the medium nozzle is highly corrosive. The loose flange is generally used in combination with the flanging short joint, that is, the flange ring is loosely sleeved outside the flanging short joint, the pipe is butt welded with the flanging short joint, and the flange sealing surface is processed on the flanging short joint.In addition, there are flat welding ring and butt welding ring plate loose flange.

Structural features:Threaded flanges manufactured in accordance with ASME B16.5 are similar to sliding flanges, but the holes shall have tapered pipe threads in accordance with ASME b1.20.1. The thread shall be concentric with the axis of the flange opening, and the alignment deviation (perpendicular to the flange face) shall not exceed 5mm per meter. Threaded flanges are NPs 1 / 2 to NPs 24 in size and pressure classes are 150, 300, 400, 600 and 900. The sizes of class 1500 and 2500 are NPs 1 / 2 to NPs 2 - 1 / 2.Class 150 threaded flange has no counterbore.

Features of Flat Welding FlangesWhen welding flat welding flanges, only one side welding is required, and there is no need to weld the inner port of the pipe and flange connection. The welding installation of butt welding flanges requires double-sided welding of the flanges. Therefore, flat welding flanges are generally used for low and medium pressure pipelines, and butt welding flanges are used for the connection of medium and high pressure pipelines. Butt welding flanges are generally at least PN2.5MPa. Butt welding is used to reduce stress concentration.

Channel steel is a long strip of steel with a groove-shaped section and a channel-shaped section steel. It is a carbon structural steel for construction and machinery. Channel steel is mainly used in building structure, curtain wall engineering, mechanical equipment and vehicle manufacturing.Channel steel is required to have good welding, riveting performance and comprehensive mechanical properties. The raw material billets for producing channel steel are carbon-structured steel or low-alloy steel billets with a carbon content not exceeding 0.25%.

It has good anti-fatigue, anti-radiation, anti-oxidation and corrosion resistance properties. Nickel-based corrosion-resistant alloys mostly have austenite structure. In the state of solid solution and aging treatment, there are also intermetallic phases and metal carbonitrides on the austenite matrix and grain boundaries of the alloy.With good processing performance, welding performance and long-term microstructure stability, it can manufacture various parts with complex shapes. It has been widely used in the above temperature range in aerospace, nuclear energy, and petroleum industries.

AWS Chemical Composition RequirementsC = 0.08 maxSi = 0.90 maxCr = 17.0 – 20.0P = 0.04 maxNi = 11.0 – 14.0S = 0.03 maxMo = 2.0 – 3.0Mn = 0.5-2.5Cu = 0.75 maxApplicationE316-16 electrodes are designed for the welding to type 316 chromium-nickel steel. This alloy contains 2% to 3% molybdenum is addition to sufficient chromium and nickel to render is austenitic.

Inconel alloys are one of the most versatile metals around. Their applications cut across a wide range of industries thanks to their high performance and superior properties.They are a natural choice within the automotive, aerospace, marine, and oil and gas industries since they are specifically optimized to withstand some of the most demanding manufacturing conditions.What exactly makes Inconel® alloys so special?

The answer to the question 'what is Nickel Alloy and Inconel' has an interesting answer. Let's start with NickelNickel is an extraordinarily adaptable aspect and has a outstanding vary of beneficial houses such as warmth and corrosion resistance, electrical and magnetic abilities as nicely as a low enlargement level. As an brought benefit, it can additionally be effortlessly bonded with a variety of special alloys.Nickel's adaptability and herbal houses make it a very beneficial metal.