Forged-manufacture,factory,supplier from China

Specification of stainless steel rod: From 1.0mm to 250mm size (diameter, side length, thickness oropposite side distance) not more than 250mm hot rolled and forged stainless steel rod.  Stainless steel rod material: 304, 304L, 321, 316, 316L, 310S, 630, 1Cr13, 2Cr13, 3Cr13, 1Cr17Ni2, duplex steel, antibacterial steel and other materials! Stainless steel rod has broad application prospects, is widely used in hardware kitchenware, shipbuilding, petrochemical, machinery, medicine, food, electric power, energy, building decoration, nuclear power, aerospace, military industry and ot

First Competition patternNickel alloys are mainly used in the household field, such as electronic and electrical products, TV manufacturing, home appliance manufacturing, etc.It has been predicted that the copper alloy lead frame strip will completely replace the nickel alloy lead frame strip. At present, through the screening and classification of the market, it shows that the nickel alloy cannot be completely replaced, and the proportion of nickel alloy accounting for 20% and copper alloy accounting for 80% has basically been formed.

Production process:Stainless steel checker plate is divided into two categories:One is rolled by a rolling mill in the production of stainless steel by a steel mill. The thickness of this type of product is about 3-6mm, and it is in the state of annealing and pickling after hot rolling.

Inconel alloy 625 is a mixture of nickel, chromium and molybdenum, which can provide high-strength pipes or pipes and even resist high corrosive environments. Because of its unique performance, it is often used in aerospace and marine applications, nuclear reactors, pollution control plants and chemical processing.Monel series of nickel alloys can also be used for pipes and pipes. Monel alloy 400 is a cost-effective option, but can be hardened by hot working or cold working, thus providing a very durable end product.

Types of Socket Weld FlangesSocket Weld Raised Face FlangeRaised Faced Socket weld Flanges4 Bolt Socket Weld flange300# Socket Weld FlangeANSI B16.5 Socket weld FlangesSocket weld Flange DimensionsASME B16.5 SWRF FlangesANSI B16.5 Class 150 Socket weld FlangesStainless Steel Socket weld Flanges Suppliers1 inch Socket weld FlangeSocket weld Ring Type Joint FlangesASME B16.47 Series A and B SWRF Flanges2 inch Socket weld Flange3 inch Socket weld FlangeANSI B16.5 class 150 SWRF Flange StockholderANSI 150 Socket weld Flange4 inch Socket weld FlangeHigh Quality SWRF FlangesFlat Face SWRF Flange6 in

Implementation principleThreaded flange is a kind of non-welded flange, which processes the inner hole of the flange into pipe threads, and is matched with the threaded pipe to realize the connection. Compared with the flat welding flange or the butt welding flange, the threaded flange has the characteristics of convenient installation and maintenance, and can be used on some pipelines where welding is not allowed. Alloy steel flanges have sufficient strength, but are not easy to weld, or the welding performance is not good, and threaded flanges can also be selected.

Seawater corrosion resistant materials, and widely used in Marine engineering. However, in practical engineering application, the stainless steel connection, especially the welding area, often appears various corrosion damage, resulting in a great loss. Therefore, in this paper, according to the characteristics of seawater corrosion of stainless steel, the seawater corrosion and anticorrosion mechanism of its weld site were comprehensively analyzed and studied.

Structural features:Threaded flanges manufactured in accordance with ASME B16.5 are similar to sliding flanges, but the holes shall have tapered pipe threads in accordance with ASME b1.20.1. The thread shall be concentric with the axis of the flange opening, and the alignment deviation (perpendicular to the flange face) shall not exceed 5mm per meter. Threaded flanges are NPs 1 / 2 to NPs 24 in size and pressure classes are 150, 300, 400, 600 and 900. The sizes of class 1500 and 2500 are NPs 1 / 2 to NPs 2 - 1 / 2.Class 150 threaded flange has no counterbore.

Loose flange: This kind of flange is often used in the case where the medium temperature and pressure are not high and the medium nozzle is highly corrosive. The loose flange is generally used in combination with the flanging short joint, that is, the flange ring is loosely sleeved outside the flanging short joint, the pipe is butt welded with the flanging short joint, and the flange sealing surface is processed on the flanging short joint.In addition, there are flat welding ring and butt welding ring plate loose flange.

Features of Flat Welding FlangesWhen welding flat welding flanges, only one side welding is required, and there is no need to weld the inner port of the pipe and flange connection. The welding installation of butt welding flanges requires double-sided welding of the flanges. Therefore, flat welding flanges are generally used for low and medium pressure pipelines, and butt welding flanges are used for the connection of medium and high pressure pipelines. Butt welding flanges are generally at least PN2.5MPa. Butt welding is used to reduce stress concentration.