Stainless Steel Arc Welding Rods Nz-manufacture,factory,supplier from China

Solid core stainless steel welding wire can be inert gas welding (TIG, MIG welding). It can also be used for submerged arc welding. MIG welding of stainless steel can not only achieve high efficiency welding, but also easy to realize welding automation, widely used in surfacing and thin plate welding and other fields.

The application of stainless steel flux cored wire is mainly MAG welding, MAG welding has the following characteristics; 1) Compared with manual welding, welding speed can be improved 2-4 times, its welding efficiency is up to 90%(stainless steel electrode only 55%)2) to the current, voltage adaptation range, welding conditions are easy to set, easy to conduct semi-automatic and automatic welding. 3) Good slag removal, welding pass surface gloss. In addition, the splash is very small, the arc stability is good, X-ray qualified.A .DescriptionA.

Products InfomationApplication:Used to weld ship building steel(A,B,D,E,A36,D36,E36)and equivalent mild steel or 550Mpa grade mild alloy steel, such as container building, construction machine, railway construction, pressure vessel for semi-auto or automatic gas shielded welding.It HAS excellent welding process performance, stable arc combustion, less spatter, beautiful weld forming, small stomatal sensitivity of weld metal, good all-position welding process, suitable for a wide welding current range.

Butt welding ring loose flangeThe purpose of using butt welding ring loose flange is to save materials. The flange plate is made of low-grade material, and the pipe part is made of the same material as the pipe, so as to save material.Butt weld ring loose flange:1. Cost saving. When the pipe material is special and expensive, the cost of welding flanges of the same material is high.2. It is inconvenient for welding or processing or requires high strength. Such as plastic pipes, glass steel pipes and the like.3. Easy to construct.

introduction:Welded stainless steel pipe provides us a large diameter but low cost solution. Our welding process mainly is Plasma-Arc Welding(PAW), its biggest diameter could reach 3000mm. If other process is required, please state it in the requirement of stainless steel tubings.Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface.

C-276 alloy welding performance and common austenitic stainless steel is similar to using a welding method for welding C-276 before, we must take measures to make the corrosion resistance of the weld and heat affected zone the smallest decline, such as tungsten gas shielded arc welding (GTAW), gas metal arc welding (GMAW), submerged arc welding or some other can make the weld and heat affected zone the smallest decline in corrosion resistance welding method.

Our variety of wire made of stainless steel aren't best recognized for their range but also are regarded for their excellent quality, lengthy lifestyles and really reasonable fees.

Detailed content：Standard：AWS A 5.9YB/T5092Chemical Composition %CMnSiCrNiPSGradeER304≤0.081.0 – 2.5≤ 0.6017 – 198 – 11≤ 0.03≤ 0.03TypeSpool  (MIG)Tube (TIG)Specification ( MM )0.8、0.9、1.0、1.2、1.6、2.01.6、2.0、2.4、3.2、4.0、5.0PackageS100/1kg          S200/5kgS270,S300/15kg-20kg5kg/box    10kg/box    length :1000MMMechanical PropertiesTensile Strength MpaElongation after fracture A（%）≥ 520≥ 30Diameter（MM）0.81.01.21.62.02.53.2Current（A）

Available SizesDiameter X Spool SizesDiameter X Coil Sizes.025 x 2#, 10#, 25#1/16 x 60# & mill coil.030 x 2#, 10#, 25#, 30#, 33#5/64 x 60# & mill coil.035 x 2#, 10#, 25#, 30#, 33#3/32 x 60# & mill coil.045 x 2#, 10#, 25#, 30#, 33#1/8 x 60# & mill coil1/16 x 10#, 25#, 30#, 33#3/16 x 60# & mill coil5/32 x 60# & mill coilApplicationWW308 is used to MIG, and submerged arc welding of un-stabilized stainless steels such as Types 301, 302, 304, 305, 308.

Many industry will use 420 stainless steel rods, this kind of material with metallic luster, so choose the material production tools or equipment products, prominent on the appearance, the surface of the plate is very smooth, can also be customized according to the actual demand for processing, high plasticity, in the process of installation can tolerate acid and alkaline substances.Product Parameter：ProductStainless Steel BarBase materialstainless steel 200 series,300 series,400 seriesThickness0.40-5.00mmDiameter6-273mmstandardASTM A554/DIN/EN10296-2/JIS G3446,A269,A249,A270,EN10204 3.1Qualit

Stainless-steel flux cored cord may be like carbon metal and coffee alloy steel flux cored cord, chrome steel is simple and efficient welding, the application of chrome steel flux cored cord is specially magazine welding, mag welding has the following characteristics; 1) in comparison with manual welding, welding pace can be improved 2-4 instances, its welding performance is as much as ninety% (stainless-steel electrode only fifty five%) 2) to the cutting-edge, voltage adaptation variety, welding situations are smooth to set, smooth to conduct semi-computerized and automatic welding.

317l bars & rods is providing better creep, pressure to rupture, high tensile energy, and weldability. due to first-rate yield electricity, it has great thermal stability that can be utilized in accelerated temperature service. it has advanced corrosion resistance to corrosive acids together with acetic, formic, sulfurous, citric, and tartaric acid.

309S  Stainless Steel Flux Cored Welding  Wire309S  Stainless Steel Flux Cored Welding  Wire Compared with manual welding rod and argon arc welding wire, flux cored wire has obvious advantages, mainly changing the intermittent welding process into a continuous production mode, thus reducing the number of welding joints, improving the quality of welds, improving production efficiency and saving energy.309S  Stainless Steel Flux Cored Welding  Wire  detailsProduct Parameter：CommodityStainless Steel Welded Wire/Stainless Steel RodSt

ER410 H1Cr13 Y410 510 25 13Cr steel, the deposited metal is 13Cr, with high hardenability, excellent oxidation resistance and corrosion resistance at high temperature, suitable for welding of AISI410 or 420.ER410 flux-cored stainless steel wire Application: used for welding 410 or 420 series stainless steel, with high hardening, high temperature oxidation resistance, corrosion resistance, used in petroleum refining and chemical industry and surfacing repair, such as 12Cr13 (sus410)Products DescriptionWarranty3 yearsCustomized supportOEM, ODMPlace of OriginChinaBrand NameXINYUANModel NumberER41

Stainless Steel 317 Square Bars & Rods have excellent yield strength and tensile strength, which is suitable for cold working and annealed condition appliance. It has nickel and low carbon content to provide high formability and excellent corrosion resistance to alkaline compounds. SS 317 Bars & Rods is austenitic stainless steel non-magnetic in nature, less conductivity to electricity, and less brittle at low temperature.

ASTM A182 F304 304L  F316 316L Stainless Steel Socket Welding FlangeItemDescriptionBasic InformationMaterial GradeWP304 , WP304L , WP304H , WP316 , WP316L , WP316Ti , WP309S , WP310S , WP321 , WP321H , WP347 , WP347H , F304 , F304L , F304H , F316 , F316L , F310S , F321 etcSize1/2" to 48" Sch 5S to XXSStandardASTM A403 etc .Process MethodForged / CastingIndustry & AdvantageApplicationa) Connect pipesAdvantagea) High technology ; good surface ; high quality etcTerms & ConditionsPrice ItemFOB , CFR , CIF or as negotiationPaymentT / T , LC or as negotiationDelivery Time

ER316/316L is used for welding types 316 and 316L stainless steels.  It has a maximum carbon content of .03% to reduce the possibility of formation of intergranular carbide precipitation.  This low carbon alloy is not as strong as 316H at elevated temperatures.Typical Applications:   primarily used for welding low carbon molybdenum bearing austenitic alloys AWS Class: ER316/316LCertification:                  AWS A5.9/A5.9M:2006Alloy:  ER316/316LAWS/ASME SFA A5.9&nb

202 stainless steel is one of the 200 series of stainless steel, gb model is 1Cr18Mn8Ni5N. 202 stainless steel is widely used in building decoration, municipal engineering, highway guardrail, hotel facilities, shopping malls, glass handrails, public facilities and other places.It is made by high-precision automatic pipe making equipment through self-dissolution welding, roll-forming, and welding by filling gas protection (inside and outside of the pipe) without any metal filler.

E308L-16 Stainless Steel ElectrodesUses: E308L-16 Stainless Steel Electrodes  Used for welding gadget of urea, artificial fiber, and many others.

254SMO is an austenitic stainless steel.  Because of its high molybdenum content, it has very high resistance to spot corrosion and crevice corrosion. Main ingredients:254 smo carbon (C) 0.02 or less, manganese (Mn) of 1.00 or less, nickel (Ni) 17.5 ~ 18.5, silicon (Si) of 0.8 or less phosphorus (P) of 0.03 or less, sulfur (S) of 0.01 or less, chromium (Cr) 19.5 ~ 20.5, copper (Cu) 0.5 ~ 1.0, molybdenum (Mo) 6.0 ~ 6.5  National standards: UNS S31254, DIN/EN 1.4547, ASTM A280, ASME SA-240  Welding material: ERNiCrMo-3 wire, ENiCrMo-3 electrode Product Name254smo st

 With well equiped processing platforms including shearing,cutting,surface finishing,forming,welding and maching,Xinyuan Steel Co.,Ltd supply high quality stainless steel coils Specifications:Standard: ASTM A240, JIS G4304, EN100882. Grade: 200series&300series&400series3. Thickness: 0.03mm - 6.0mm4. Width: 8mm-600mm5. Length: as customers' request6.

304L stainless steel is a variant of the lower carbon 304 stainless steel, used for welding occasions.

Class: E316HTX-XAWS: A5.22Conforms to Certification: AWS A5.22                       ASME SFA A5.22Weld Process: Gas Metal ArcAWS Chemical Composition RequirementsC = 0.04 – 0.08S = 0.03 maxMn = 0.5 – 2.5Cr = 17.0 – 20.0Si = 1.0 maxNi = 11.0 – 14.0P = 0.04 maxMo = 2.0 – 3.0Cu = 0.75 maxApplicationElectrodes of this classification usually are used for welding similar alloys.

304 304L Stainless Steel304 is a variation of the basic 18-8 grade, Type 302, with a higher chromium and lower carbon content. Lower carbon minimizes chromium carbide precipitation due to welding and its susceptibility to intergranular corrosion. In many instances, it can be used in the ”as-welded“ condition, while Type 302 must be annealed in order to retain adequate corrosion resistance. Type 304L is an extra low-carbon variation of Type 304 with a 0.03% maximum carbon content that eliminates carbide precipitation due to welding.