Stainless Steel-manufacture,factory,supplier from China

Through integrated production control, stainless steel foil that is excellent in etching properties and press formability, in addition to ultimately high thickness accuracy, strength, and spring characteristics. Stainless Steel FoilStainless steel foil is produced through the highly accurate rolling of stainless steel to be as thin as 100 mm, thus it has excellent flexibility, lightweight characteristics, and corrosion resistance.

According to the main chemical composition is divided into chromium stainless steel, chromium nickel stainless steel and chromium manganese nitrogen stainless steel; Can also be divided into acid resistant stainless steel and heat resistant stainless steel with performance characteristics; It is usually classified by metallographic structure.

410 Stainless Steel Checker Plate410 stainless steel contains 0.15% carbon and 13% chromium. It is a semi martensitic stainless steel. After quenching and tempering, it has high strength and toughness. It has good corrosion resistance and machining performance in a weak corrosive medium with a temperature not exceeding 30 degrees. It also has rust and corrosion resistance in wet atmosphere and fresh water, and has high thermal stability below 700 ℃.

Our stainless steel plates can be used for the following range of applicationsChemical industriesOil & GasAviation & AerospacePetrochemicalsPharmaceuticalsWe provide high and fine focus plasma, waterjet & laser cutting.304/1.403 Stainless6 mm8 mm10 mm12 mm14 mm15 mm16 mm18 mm20 mm22 mm25 mm28 mm30 mm32 mm35 mm36 mm40 mm45 mm50 mm55 mm60 mm65 mm70 mm75 mm80 mm90 mm100 mm110 mm120 mm130 mm150 mm 304L/1.4307 stainless6 mm8 mm10 mm12 mm14 mm15 mm16 mm18 mm20 mm22 mm25 mm28 mm30 mm32 mm35 mm36 mm40 mm45 mm50 mm55 mm60 mm65 mm70 mm75 mm80 mm90 mm100 mm110 mm120 mm130 mm150 mm 3

AISI 309L Stainless Steel Wire309S stainless steel -- S30908 (American AISI, ASTM) 309S. Most of the steel mills produce 309S stainless steel, which has good corrosion resistance and high temperature resistance. Withstands high temperatures of 980°C. Mainly used in boiler, chemical and other industries.

Stainless steel plate  is a kind of hollow section and not using a seams round.the thicker the thickness of the product, stainless steel plate is more cost-effective and sensible, the thinner the wall thickness, stainless steel plate's processing expenses will upward thrust appreciably.Stainless steel plate of its constrained performance of the choice, the overall low precision seamless steel pipe : wall thickness is not uniform, stainless steel plate's surface brightness is low, stainless-steel plate's cost of h

316L Stainless steel channelThe main purpose of hot-rolled stainless steel common channel steel: common channel steel is mainly used in building structures, vehicle manufacturing and other industrial structures, and is often used in conjunction with I-beams.The commonly used stainless steel channel materials for stainless steel production are: 201, 202, 301, 304, 321, 316, 316L, and special materials can generally be customized.316L Stainless steel channel details:Product NameStainless steel channelMaterial201,304,316,321,347h,309s,310s904lThickness1.5mm/1.9mm/2.0mm/2.5mm/2.7mm12GA/14GA/16GA/0

Most people have something made of stainless steel in their homes, whether it’s a kitchen appliance, some hardware, or even a piece of décor. Almost everybody knows what stainless steel is and what it looks like. Something that surprises many people is finding out there are actually multiple kinds of stainless steel. Check out this guide to learn more about the different types of stainless steel. Austenitic Austenitic stainless steel is designed to be nonmagnetic. A great example of an everyday application for austenitic stainless steel is a stainless steel oven.

Solid core stainless steel welding wire can be inert gas welding (TIG, MIG welding). It can also be used for submerged arc welding. MIG welding of stainless steel can not only achieve high efficiency welding, but also easy to realize welding automation, widely used in surfacing and thin plate welding and other fields.

202 stainless steel is one of the 200 series of stainless steel, gb model is 1Cr18Mn8Ni5N. 202 stainless steel is widely used in building decoration, municipal engineering, highway guardrail, hotel facilities, shopping malls, glass handrails, public facilities and other places.It is made by high-precision automatic pipe making equipment through self-dissolution welding, roll-forming, and welding by filling gas protection (inside and outside of the pipe) without any metal filler.

Brilliant chrome steel coil refers to a type of stainless-steel coil that has a elegant or reflective surface finish. this finish is done through a process called electropolishing or by using the use of abrasives in the course of the manufacturing process.The bright surface end on chrome steel coils gives several blessings. it provides a clean and appealing appearance, making it a popular choice for ornamental applications, including trim, architectural capabilities, and jewelry.

Type  Stainless Steel SheetThicknessASIS,ASTM,DIN,JIS,JB,SUS,EN,etc.Size1000*2000mm, 1219*2438mm, 1219*3048mm or customized Max.

630 stainless steel is martensitic precipitation hardening stainless steel.

Our variety of wire made of stainless steel aren't best recognized for their range but also are regarded for their excellent quality, lengthy lifestyles and really reasonable fees.

Type 301 is an austenitic chromium-nickel stainless steel that is available in the annealed and cold worked conditions. In the annealed condition, Type 301 offers the highest level of stretch formability of any stainless steel and in the heavily cold worked condition offers the highest strength level of any 300 series stainless steel. Type 301 is non-magnetic in the annealed condition but becomes magnetic as a result of cold working.Type 301 is corrosion resistant in many environments, but the corrosion properties are less than that of 304/304L stainless steel.

202 stainless steel is one of the 200 series stainless steel.

introduction:Welded stainless steel pipe provides us a large diameter but low cost solution. Our welding process mainly is Plasma-Arc Welding(PAW), its biggest diameter could reach 3000mm. If other process is required, please state it in the requirement of stainless steel tubings.Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface.

254SMO is an austenitic stainless steel.  Because of its high molybdenum content, it has very high resistance to spot corrosion and crevice corrosion. Main ingredients:254 smo carbon (C) 0.02 or less, manganese (Mn) of 1.00 or less, nickel (Ni) 17.5 ~ 18.5, silicon (Si) of 0.8 or less phosphorus (P) of 0.03 or less, sulfur (S) of 0.01 or less, chromium (Cr) 19.5 ~ 20.5, copper (Cu) 0.5 ~ 1.0, molybdenum (Mo) 6.0 ~ 6.5  National standards: UNS S31254, DIN/EN 1.4547, ASTM A280, ASME SA-240  Welding material: ERNiCrMo-3 wire, ENiCrMo-3 electrode Product Name254smo st

1. Compared with 316L and 317L austenitic stainless steel,2205 alloy has better performance in corrosion resistance and crack corrosion, it has high corrosion resistance, compared with austenite, its thermal expansion coefficient is lower, higher thermal conductivity.2. Compared with austenitic stainless steel, the compressive strength of duplex stainless steel 2205 alloy is twice that of austenitic stainless steel. Compared with 316L and 317L, the designer can reduce its weight.

304 is a universal stainless steel, which is widely used in the manufacture of equipment and parts requiring good comprehensive properties (corrosion resistance and formability). To maintain the corrosion resistance inherent in stainless steel, the steel must contain at least 18% chromium and at least 8% nickel.

Stainless steel elbow is suitable for all kinds of water quality, in addition to disinfection and sterilization, do not need to control the water quality, at the same time, there is no corrosion and excessive exudate, can keep the water pure health, put an end to secondary pollution, can withstand up to 30 meters per second high water impact.

Stainless-steel coil/strip;stainless steel 430 ba coil; stainless steel cold rolled strip;stainless-steel cold rolled coil;stainless steel coil 201/304/430 merchandise description product name:cold rolled stainless-steel coils, cease 2b/ba, mild deep drawing great 1) grade: 201, 304, 410, 430 etc.

Stainless-steel sample plate is embossed by way of mechanical gadget on the chrome steel plate, in order that the floor of the concave and convex pattern.  Due to the splendid corrosion resistance and skid resistance of stainless steel sample plate has been used by many industries and started to be famous.  The pattern sample of the earliest stainless-steel sample plate is horizontal and vertical stripes crisscrossed, inside the subsequent 20-30 years researchers through non-stop experiments and improvements to have a higher anti-skid sample design is now additionally big-scale produ

Type 301 is a chromium nickel austenitic stainless steel capable of attaining high strengths and ductility by cold working. It is not hardenable by heat ...Type 301 is corrosion resistant in many environments, but the corrosion properties are less than that of 304/304L stainless steel.