Support customization-manufacture,factory,supplier from China

Stainless steel panel to support system must be solid, smooth, and easy to change and to ensure that the stainless steel panel installation, hangs Taiwan in the form of design into small units in the form of structural system or by hooking, directly by molding bite or stainless steel plate buckles the connection of the way of implementation and the overall framework and fixed. Curtain wall stainless steel veneer commonly used support system is divided into: plate structure, buckle structure and box structure.

The 2mm thick braided stainless steel plate is made of austenitic SUS316 stainless steel, and the partition is mostly 500mm x 4500mm. The panel is fixed to the aluminum alloy subframe by tapping nails, and then assembled by the aluminum alloy subframe and the unit mullister to form a stainless steel unit system. The calculation of the panel support system is analyzed according to the large deformation theory.

The application of stainless steel coil is very extensive1.

Stainless steel rolls in accordance with the method of classification can be divided into cold rolling and hot rolling two, if it is in accordance with the structural characteristics of steel classification, can be divided into 4 categories, respectively, austenitic stainless steel, ferritic stainless steel, martensitic stainless steel and precipitation hardening stainless steel.Cold rolled stainless steel coil in order to ensure its yield strength, tensile strength, elongation and hardness and other mechanical properties, steel coil in the production of the need to undergo annealing and solut

The difference between cold-rolled steel and hot-rolled steel is not in the smelting process, but in the rolling temperature, or the end temperature of rolling. When the final rolling temperature is lower than the recrystallization temperature of the steel, it is called cold rolled steel. Hot-rolled steel is easy to roll and has high rolling efficiency, but under hot-rolled conditions, the steel is oxidized, and the surface of the product is gray and dark.

STOCK SIZE RANGE AND SPECIFICATIONS:WELDED PRODUCTSEAMLESS PRODUCTNPS: 1/8” through 24”NPS: 1/8” through 8”Schedules: 5, 10S, 10, 30, 40S, 40, 80, 80SSchedules: 10, 40, 80, 160, XXHSpecifications: ASTM A312, ASME SA312Specifications: ASTM A312,ASME SA312Corrosion tested to MIL-P-24691/3 or A262 Practice ETypical Chemical Composition % (max values, unless noted)Weight %CMnPSSiCrNiMo316.082.00.045.0301.0016.0-18.011.0-14.02.0-3.0316L.0352.00.045.0301.0016.0-18.010.0-14.02.0-3.0Typical Mechanical PropertiesGradeTensile Ultimate/MinYield/MinElongation/MinKSIMPAKS

304S31 & 304S15 (1.4301) A2General purpose non-magnetic stainless steel possessing good weldability, formability and general corrosion resistance.Bar-rolled edgeRod - BS970 pt 3 BSEN 10088-3Angle - BS970 pt 1 BSEN10051Square - BS970 pt 3 BSEN 10088-3Sheet - BS1449 pt 2 BSEN 10088-2 (2B surface finish)Excellent material for polishingSuitable for food and dairy processing equipment, laundry and chemical industry, process plant and tanksSpecificationsAttributeValueBrandRS PRODensity8 g/cm³Length500 mmTensile Strength520 MpaColourSilverFormSolidWidth300 mmThermal Conductivity16.2 W/m at 100°cM

It is often said that the phase balance of duplex stainless steels is "50-50", which corresponds to the amount of austenite and ferrite. Strictly speaking, this is not true, as the ferrite content in modern duplex stainless steels is around 40% - 50% and the rest is austenite.

As an important building material, stainless steel plate has many ideal properties that other metals cannot match.  Stainless steel building materials are more and more widely used in today's society, and stainless steel will still be one of the best building materials in the world. Stainless steel plate specific application field:1.

In most cases, there is no clear distinction between food grade and sanitary grade products. Generally (not necessarily) one of the requirements can be met, and the other can be met. The reason why it is divided into food grade and sanitary grade is that the direction of certification (standard source) is different.